Grampian 28

Designed in 1975 by Rolf van der Sleen — about 150 built in Canada.

Photos

Grampian 28 "Chinook" under sail Grampian 28 "Saltkettle" Grampian 28 "Sonsie" Grampian 28 "Levitas"

Specifications on sailboatdata.com

Figures are transcribed from the sailboatdata.com record linked below and may differ from the owners’ figures elsewhere on this page. Metric values are theirs.

Hull typeFin keel, rudder on skegRigMasthead sloop
L.O.A.28.00 ft / 8.53 mL.W.L.24.50 ft / 7.47 m
Beam9.50 ft / 2.90 mDraft4.83 ft / 1.47 m (shoal: 3.75 ft / 1.14 m)
Displacement6,900 lb / 3,130 kgBallast3,060 lb / 1,388 kg
Sail area (reported)384 ft² / 35.67 m²ConstructionFibreglass
First built1975Number built107
BuilderGrampian Marine Ltd. (Canada)DesignerRolf van der Sleen
Engine (original)Volvo dieselFuel20 gal / 76 L
Water20 gal / 76 L

Rig and sail particulars

I36.50 ft / 11.13 mJ12.00 ft / 3.66 m
P31.50 ft / 9.60 mE10.50 ft / 3.20 m
S.A. fore219.00 ft² / 20.35 m²S.A. main165.38 ft² / 15.36 m²
S.A. total (100% fore + main)384.38 ft² / 35.71 m²S.A. / Displ. (from rig)17.02
Est. forestay length38.42 ft / 11.71 m

Calculated ratios

S.A. / Displ.17.00Bal. / Displ.44.35
Displ. / Length209.46Comfort ratio20.81
Capsize screening2.00S#2.60
Hull speed6.63 knPounds / inch immersion831.64

Their notes: The later Intrepid 28, by Cape Dory, was based on this same design and tooling.

Source: Grampian 28 — sailboatdata.com · related: Intrepid 28. Ratio definitions are on sailboatdata.

More about the Grampian 28